If you’ve had a concrete driveway in Glasgow for years and are looking for a more modern look, or just aiming to fill in some pot holes, you might consider resurfacing it. There are several options available, including sealcoating, staining, and self-levelling resurfacing. There are also many professionals in the Glasgow area who provide a driveway Glasgow service.
If you are looking for some practical resurfacing tips here are some steps to follow:
Staining a concrete driveway
Painting or staining a concrete driveway is an excellent way to give your driveway a new look. Concrete stain is more durable than paint and will remain looking beautiful for a longer period of time. Before staining your concrete driveway, make sure it is thoroughly cleaned. You can use a pressure washer or concrete degreaser to wash off the surface. After washing, broom the surface clean. Once your driveway is clean and dry, apply the stain. Wear protective clothing and apply the stain to a 2-foot section. Follow the manufacturer’s instructions.
Using a concrete resurfacer
Using a concrete resurfacer is a quick and relatively simple way to resurface a driveway. The product comes in dry powder form and must be mixed with water to create a slurry. It is then spread with a long-handled squeegee. Self-leveling compounds are very easy to spread and pour, and a typical job only requires two to three coats.
Sealcoating a driveway
If you’re considering a driveway sealcoating job, make sure to consider the following tips: One of the first things to consider when sealcoating a driveway is the weather. The best time to sealcoat your driveway is when the temperature is above 50 degrees Fahrenheit. Sealing your driveway in the winter could affect the performance of the sealer. The sealer might not properly bond to the asphalt or cure properly. For this reason, it is best to avoid applying the sealcoat during the winter months.
Using a self-leveling resurfacer
If the driveway on your Glasgow property is cracked or cratered, you can resurface it with a self-leveling resurface – a process that will ensure your repairs are flush with the surrounding floor. To apply the resurfacer, you need to make sure the concrete slab is damp but not wet. Once the slab is damp, spread it out with a steel trowel and gently blend it against the weather strip.
Cost of resurfacing a driveway
When determining the cost of resurfacing a driveway, the first step is assessing the area. In some cases, the area can be complex, so you can break it up into simple shapes and figure out how many square metres you’ll need. To get an accurate estimate, multiply the length and width of the area by two. If your area is not square, then you need to divide the length and width by four.